Circuit Diagram
(M/T) |
(A/T) |
Checking the tire inflation pressure
1.After driving approximately 4~6miles (7~10km or about 10min), stop at a safety
location.
2.Connect connection hose (9) of the compressor directly to the tire valve.
3.Plug the compressor power c ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper (A) and lower (B) shrouds after
removing 3 screws.
...
Installation
1.
Install the roof antenna and connect the cable.
2.
Install the roof trim.
...