Hyundai Accent: Injector. Repair procedures

Injector. Schematic Diagrams

Circuit Diagram (M/T) (A/T) ...

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the inject ...

See also:

Removal
When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...

Removal and Installation
Water Pump 1. Drain engine coolant. System is under high pressure ...

Distributing the sealant
11. Immediately drive approximately 4~6miles (7~10km or, about 10min) to evenly distribute the sealant in the tire. Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed ...