Hyundai Accent: Input Speed Sensor. Specifications
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor. Specifications
Specifications
▷ Type: Hall effect sensor
|
Operation condition [°C(°F)] |
((-)40 ~ 150)) -40 ~ 302 |
|
|
Air gap(mm)in. |
(1.2 ~ 1.8) 0.0472 ~ 0.0709 |
|
|
Output voltage(V) |
High |
1.18 ~ 1.68 |
|
Low |
0.59 ~ 0.84 |
|
Input Speed Sensor. Description and Operation
Description
Input speed sensor (A) is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the TCM.
The sensor provides critic ...
Input Speed Sensor. Schematic Diagrams
Circuit Diagram
...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Release the residual pressure in fuel line (Refer
to ...
Installation
1.
Install the interior junction box.
2.
Install the crash pad lower panel.
3.
Check that all system operates n ...
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Ve ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com