Hyundai Accent: Installation

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper (A) and lower (B) shrouds after removing 3 screws. ...

Front Wiper Motor. Components and Components Location

Component Location 1. Cap 2. Nut 3. Wiper arm & blade 4. Rivet 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly ...

See also:

Starter. Components and Components Location
Components 1. Screw 2. Front bracket 3. Stop ring 4. Stopper 5. Overrun clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet switch 10. Arma ...

Installation
1. Installation is reverse of removal. Filler-neck assembly bracket installation nut : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 ...

Tightening Torque Table Of Standard Parts
  Bolt nominal diameter (mm) Pitch (mm) Torque Nm (kg.cm, lb.ft) Head Mark 4 Head Mark 7 ...