Hyundai Accent: Interior F ( 5Door )
Hyundai Accent RB (2010-2018) Service Manual / Body (Interior and Exterior) / Body Dimensions / Interior. Body Repair / Interior F ( 5Door )
|
|
|
|
|
Seatbelt height adjust upper mounting hole (Ø15) |
Seatbelt height adjust lower mounting hole (Ø15) |
Front seatbelt retractor mounting hole (Ø12) |
|
|
|
|
|
Rear door checker mounting hole (Ø13) |
Quarter inner trim mounting hole (Ø8.5) |
Quarter inner panel tooling hole (Ø6.6) |
|
|
|
|
|
Rear door striker mounting hole (Ø13) |
Wheel house inner panel tooling hole (M,M' : Ø6.6/Ø6) |
Rear pillar trim mounting hole (Ø8.5) |
|
|
|
|
|
Rear pillar trim mounting hole (Ø8.5) |
Rear transverse trim mounting hole (Ø8.5) |
|
Interior E ( 5Door )
Front pillar trim mounting hole (Ø8.5)
Front pillar trim mounting hole (Ø8)
Cowl cross ...
Interior G ( 5Door )
Front pillar trim mounting hole (Ø8.5)
Front pillar trim mounting hole (Ø8)
Cowl cross ...
See also:
Wheel. Repair procedures
Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
PODS-F Zeroing procedure
You should perform PODS-F Re-zero procedure after service or replacement
about all part of the passenger seat. (Not included full seat assembly)
1.
Ignition “OFF” ...
Measuring Body Dimensions
1.
Basically, all measurements in this manual are taken
with a tracking gauge.
2.
When a measuring tape is used, check to be sure there
...
Hyundai Accent Manuals
- Hyundai Accent 2017-2022 Service Manual
- Hyundai Accent 2010-2025 Owners Manual
- Hyundai Accent 2010-2025 Service Manual
© 2011-2025 Copyright www.hamanual.com