Hyundai Accent: Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
|
| 1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Seat")
|
| 3. |
Remove the seat back assembly.
(Refer to the Body group - "Seat")
|
InstallationInstrument Cluster. Description
and Operation
Description
Function
Tail lamp warning buzzer
-
This function dose not operate if the vehicle equipped BCM.
-
With the tail lamp sw ...
Repair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Tr ...
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase. This system supplies fresh
filtered air to the crankcase th ...