1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the fog lamp connector (A).
|
3. |
Remove the fog lamp bulb (A) after turning in the counterclockwise
direction.
|
4. |
Remove the fog lamp assembly (A) after loosening 4 screws.
|
Installation
1.
Installation is the reverse of removal.
2.
Use a SST (09581-11000) when installing the brake caliper assembly.
3 ...
Reassembly
•
Thoroughly clean all parts to be assembled.
•
...
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil
...