Hyundai Accent: Installation

Removal

1. Disconnect the negative (-) battery terminal. 2. Disconnect the fog lamp connector (A). 3. Remove t ...

Inspection

Multifunction Switch (Lighting) 1. Disconnect the negative (-) battery terminal. 2. Remove the lighting switch of the multi-function switc ...

See also:

ECM Problem Inspection Procedure
1. TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis ground using the backside of ECM harness connector as ECM side check point. If the problem is fo ...

In case of an emergency while driving
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you h ...

Power Out Side Mirror Switch. Components and Components Location
Component ...