Hyundai Accent: Room Lamp. Repair proceduresInspection
| 1. |
Check that the switch operates properly after disconnecting the
room lamp connector (A).
|
Installation
Overhead Console Lamp. Schematic
DiagramsComponents and Components
Location
Components
1. HECU module
2. Front wheel speed sensor
3. Rear wheel speed sensor
4. Yaw rate & Lateral G sensor
5. Steering angle sensor
6. ABS Warning l ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least three minutes befo ...
Repair procedures
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the intake manifold
and connect a vacuum pump to the nipple on the intake manifold.
· At Col ...