Hyundai Accent: Underdrive Brake Control Solenoid Valve(UD/B_VFS). Repair procedures

Underdrive Brake Control Solenoid Valve(UD/B_VFS). Schematic Diagrams

Circuit Diagram ...

Inspection

1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

See also:

Checking the tire inflation pressure
1.After driving approximately 4~6miles (7~10km or about 10min), stop at a safety location. 2.Connect connection hose (9) of the compressor directly to the tire valve. 3.Plug the compressor power c ...

Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws (B) then connect the pressure side impact sensor connector (A). ...

Clutch Master Cylinder. Components and Components Location
Components 1. Reverse hose 2. Master cylinder 3. Clutch switch 4. Ignition lock switch 5. Pedal pad ...