Hyundai Accent: Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications
Specifications
Direct control VFS[UD/B]
▷ Control type : Normal high type
|
Control Pressure kpa (kgf/cm², psi) |
500.14 ~ 9.81 (5.5 ~ 0.1, 7.82 ~ 1.42) |
|
Current value(mA) |
50 ~ 850 |
|
Internal resistance(Ω) |
5.1 |
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Description and Operation
Description
Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the underdrive ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Schematic Diagrams
Circuit Diagram
...
See also:
Heated Oxygen Sensor (HO2S). Specifications
Specification
HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.4 ~ 4.0 [20°C(68°F)]
HO2S [Bank 1/Sensor 2 ...
Front Impact Sensor (FIS). Description and Operation
Description
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary pur ...
Distributing the sealant
11. Immediately drive approximately 4~6miles (7~10km or, about 10min) to evenly
distribute the sealant in the tire.
Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com