Hyundai Accent: Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing.
2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior light housing notches and snap the lens into place.
5. If the map lamp and room lamp are not operating, have the vehicle checked by an authorized HYUNDAI dealer.
CAUTION
Use care not to dirty or damage lens, lens tab, and plastic housings.
License plate light bulb replacement
4 Door
1. Remove the trunk trim.
2. Remove the socket by turning it counterclockwise.
3. Remove the bulb by pulling it straight out.
4. Install a new bulb.
5. Install the socket by turning it c ...
Appearance care
...
See also:
Projected Dimensions ( 4 Door )
Front side member tooling hole (Ø6.6)
Side cover mounting hole
(B/B’: Ø6.6/ Ø8.6)
...
Alternator. Components and Components
Location
Components
1. Nut
2. Pulley
3. Spacer
4. Front bracket
5. Front bearing
6. Stator
7. Rotor
8. Rear bearing
9. Rear bracket
10. Brush holder assem ...
Opening the trunk
Press the trunk unlock button for more than 1 second on the transmitter
(if equipped).
Insert the master key into the lock and turn it clockwise.
To open the trunk from inside the ve ...
Hyundai Accent Manuals
