Hyundai Accent Manuals

Hyundai Accent: Light bulbs - Maintenance - Hyundai Accent 2010-2019 Owners ManualHyundai Accent: Light bulbs

Prior to working on the light, firmly apply the parking brake, ensure that WARNING - Working on the lights

Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the LOCK position and turn off the lights to avoid sudden movement of the vehicle and burning your fingers or receiving an electric shock.

Use only bulbs of the specified wattage.

Be sure to replace the burned-out bulb with one of the same wattage rating. CAUTION

Be sure to replace the burned-out bulb with one of the same wattage rating. Otherwise, it may cause damage to the fuse or electric wiring system.

If you dont have necessary tools, the correct bulbs and the expertise, CAUTION

If you dont have necessary tools, the correct bulbs and the expertise, consult an authorized HYUNDAI dealer. In many cases, it is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true if you have to remove the headlight assembly to get to the bulb(s). Removing/installing the headlight assembly can result in damage to the vehicle.

After heavy, driving rain or washing, headlight and taillight lenses could NOTICE

After heavy, driving rain or washing, headlight and taillight lenses could appear frosty. This condition is caused by the temperature difference between the lamp inside and outside. This is similar to the condensation on your windows inside your vehicle during the rain and doesnt indicate a problem with your vehicle. If the water leaks into the lamp bulb circuitry, have the vehicle checked by an authorized HYUNDAI dealer.

Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity. NOTICE Not all fuse panel descriptions in this manual may be applicable to your ve ...

Headlight, position light, turn signal light, side marker light and front fog light bulb replacement
(1) Headlight (High/Low) (2) Front turn signal light / Position light (3) Side marker (4) Front fog light (if equipped) Headlight / Side marker 1. Open the hood. 2. Remove the headlight bulb ...

See also:

Before starting
Close and lock all doors. Position the seat so that all controls are easily reached. Adjust the inside and outside rearview mirrors. Be sure that all lights work. Check all gauges. Check ...

Removable towing hook
1. Open the trunk lid/tailgate, and remove the towing hook from the tool case. 2. Remove the hole cover pressing the lower part of the cover on the bumper. 3. Install the towing hook by turning it ...

Installation
Installation is the reverse of removal. Canister installation bolt/nut: 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft) ...

Categories

Hyundai Accent Manuals

2011-2019 Copyright www.hamanual.com