Hyundai Accent: Brake Pedal. Repair procedures

Brake Pedal. Components and Components Location

Components 1. Brake pedal member assembly 2. Stop lamp switch 3. Pedal bushing 4. Return spring 5. Brake pedal 6. Brake pedal pad ...

Removal

1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group - "Crash pad") ...

See also:

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

Components and Components Location
Component Location 1. Power door mirror 2. Power door mirror switch ...