Hyundai Accent: Cylinder Block. Repair procedures
Hyundai Accent RB (2010-2018) Service Manual / Engine Mechanical System / Cylinder Block / Cylinder Block. Repair procedures
Cylinder Block. Components and
Components Location
Components
1. Cylinder block
2. Ladder frame
3. Crankshaft
4. Crankshaft upper bearing
5. Crankshaft lower bearing
6. Thrust bearing
7. Main bearing cap
...
Disassembly
Engine removal is required for this procedure. (Refer to
Engine and transaxle assembly removal in this group)
1.
M/T : Remove the fly wheel.
2.
...
See also:
Knock Sensor (KS). Description
and Operation
Description
Knocking is a phenomenon characterized by undesirable vibration
and noise and can cause engine damage. Knock Sensor (KS) is installed on the
cylinder block and senses engine knoc ...
Wheel. Repair procedures
Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the trunk lower trim.
(Refer to the BD group - " Trunk Lid")
...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com