Hyundai Accent: Front Impact Sensor (FIS). Repair procedures

Front Impact Sensor (FIS). Components and Components Location

Components ...

Removal

• Removal of the airbag must be performed according to the precautions/ procedures described ...

See also:

Removal and Installation
Water Pump 1. Drain engine coolant. System is under high pressure ...

Service Adjustment Procedure
Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, ...

Side repeater light bulb replacement
Type A 1. Remove the light assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by t ...