Hyundai Accent: Fuel Pressure Control Valve. Description and Operation

Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

Installation

• Install the component with the specified torques. • ...

Fuel Pressure Control Valve. Specifications

Specification Item Specification Coil Resistance (Ω) 0.5 [20°C(68°F) ...

See also:

Installation
1. Installation is reverse of removal. Fuel pump plate cover installation bolt : 1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.44 ~ 2 ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to ...

Interior E ( 5Door )
Front pillar trim mounting hole (Ø8.5) Front pillar trim mounting hole (Ø8) Cowl cross ...