Hyundai Accent: Fuel Tank Pressure Sensor
(FTPS). Description and Operation
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Fuel Tank Pressure Sensor
(FTPS). Description and Operation
Description
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative
emission control system and is installed on the fuel tank, the fuel pump, or
the canister. It checks the purge control solenoid valve operation and detects
a leakage of the system.
Accelerator Position Sensor
(APS). Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the ...
Fuel Tank Pressure Sensor
(FTPS). Specifications
Specification
Pressure [kPa (kgf/cm², in
H2O)
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
...
See also:
Installation
When replacing the ECM, the vehicle equipped with
the immobilizer must be performed procedure as below.
[In the ...
Components Location
Supplemental Restraint System Control
Module (SRSCM)
Driver Airbag (DAB) / Passenger Airbag
(PAB)
Side Airbag (SAB)
Curtain Airbag (CA ...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST : For a single wiping cycle, push the lever upward and release it with the
lever in the OFF position. The wipers will operate continu ...
Hyundai Accent Manuals
В© 2011-2022 Copyright www.hamanual.com