Hyundai Accent Manuals

Hyundai Accent: Input Speed Sensor. Description and Operation - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Accent: Input Speed Sensor. Description and Operation

Description

Input speed sensor (A) is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.


Installation
1. Installation is the reverse of removal. • ...

Input Speed Sensor. Specifications
Specifications ▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.2 ~ 1.8) 0.0472 ...

See also:

Removal
Engine removal is not required for this procedure. • Use fender covers to avoid damaging painted ...

Removal
1. Remove the under covers (A). Tightening torque: 6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 7.9lb-ft) ...

Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 7,500 miles (12,000 km) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When r ...

Hyundai Accent Manuals

© 2011-2021 Copyright www.hamanual.com