Hyundai Accent: Inspection
| 1. |
Check the hub for cracks and the splines for wear.
|
| 2. |
Check the brake disc for scoring and damage.
|
| 3. |
Check the rear axle carrier for cracks
|
| 4. |
Check the bearing for cracks or damage.
|
Replacement
[Disc Type]
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and ...
See also:
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure resistance between ...
TCM Terminal Input/ Output Signal
Connector [CHG-AA]
Pin
Description
Condition
Input/output value
Type
Level
22
Overdrive clutch c ...
Installation
1.
Installation is the reverse of removal.
...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com