Hyundai Accent: Rear Axle Assembly

Reassembly

1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boots. 2. Apply grease to the joint boot on the side of the wheel an ...

Rear Hub - Carrier. Components and Components Location

Components 1. Rear torsion beam assembly 2. Brake assembly 3. Rear wheel hub assembly 4. Rear brake disc 5. Rear brake disc mounting screw 6. Rear wheel / T ...

See also:

Removal
1. Loosen the windshield wiper arm nut (A) after removing a wiper cap (B). 2. Remove the windshield wiper arm and blade. ...

Front Impact Sensor (FIS). Description and Operation
Description The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary pur ...

Installation
Rear Disc Brake Type 1. Install the parking brake cable. 2. Install the parking brake cable (A), and then install the clip (B ...