Hyundai Accent: Installation

Removal

1. Remove the following items; A. Engine cover (A). (Refer to "Intake and Exhaust system" in EM group) ...

Manual Transaxle Control System

...

See also:

If engine turns over normally but does not start
1. Check fuel level. 2. With the ignition switch in the LOCK position, check all connectors at ignition coils and spark plugs. Reconnect any that may be disconnected or loose. 3. If the engine sti ...

Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector ...

Defogging logic
To reduce the probability of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or position.To can ...