Hyundai Accent: Manual Transaxle Control System

Installation

1. Installation is the reverse of removal. • ...

Shift Lever. Components and Components Location

Components 1. Shift lever knob & boot assembly 2. Shift lever assembly 3. Shift cable assembly 4. Select cable assembly 5. Retainer ...

See also:

Measurement Point
Measurements should be taken at the center of the hole. ...

If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull off the roa ...

Repair procedures
Inspection [System Inspection] 1. Disconnect the vapor hose from the intake manifold and connect a vacuum pump to the nipple on the intake manifold. · At Col ...