Hyundai Accent Manuals

Hyundai Accent: Manifold Absolute Pressure 
Sensor (MAPS). Specifications - Engine Control System - Engine Control/Fuel SystemHyundai Accent: Manifold Absolute Pressure Sensor (MAPS). Specifications

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS). Specifications

Specification

Pressure
[kPa (kgf/cm², psi)]
Output Voltage (V)
20.0 (0.20, 2.9)
0.79
46.7 (0.47, 6.77)
1.84
101.3 (1.03, 14.7)
4.0


Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog ...

Manifold Absolute Pressure Sensor (MAPS). Troubleshooting
Signal Waveform ...

See also:

Removal
PODS-F ECU 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front pa ...

Removal
1. Remove the front wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Accelerator Position Sensor (APS). Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important senso ...

Hyundai Accent Manuals

В© 2011-2022 Copyright www.hamanual.com