Hyundai Accent: Overhead Console Lamp. Repair procedures

Overhead Console Lamp. Schematic Diagrams

Circuit Diagram ...

Inspection

Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

See also:

Schematic Diagrams
Circuit Diagram ...

Removal
When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the trunk lower trim. (Refer to the BD group - " Trunk Lid") ...