Hyundai Accent: 26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation

26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake.

Installation

1. Installation is the reverse of removal. • ...

26 Brake Control Solenoid Valve(26/B_VFS). Specifications

Specifications Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.5, 1.42 ~ 7.82) ...

See also:

Crash Pad. Components and Components Location
Components 1. Main crash pad assembly 2. Side airvent duct [RH] 3. Side airvent duct [LH] 4. Cluster assembly 5. Cluster facia panel 6. Heater control unit 7. ...

Removal
1. Remove the rear roof trim. (Refer to the Body group - Roof trim). 2. Disconnect the antenna cable (A). 3 ...

If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull off the roa ...