Hyundai Accent Manuals

Hyundai Accent: 26 Brake Control Solenoid Valve(26/B_VFS). Specifications - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Accent: 26 Brake Control Solenoid Valve(26/B_VFS). Specifications

Specifications

Direct control VFS[26/B]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14
(0.1 ~ 5.5, 1.42 ~ 7.82)
Current value(mA)
50 ~ 850
 Internal resistance(Ω)
5.1


26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description 26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake. ...

26 Brake Control Solenoid Valve(26/B_VFS). Schematic Diagrams
Circuit Diagram ...

See also:

Coolant. Repair procedures
Refilling And Bleeding Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid und ...

Dimensions Projected
1. These are the dimensions measured when the measurement points are projected from the vehicle's surface, and are the reference dimensions used for used for body ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

Hyundai Accent Manuals

В© 2011-2026 Copyright www.hamanual.com