1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
3. |
Disconnect the connectors and remove the BCM (A) after loosening
2 bolts.
|
Removal
1.
Turn the ignition switch OFF and disconnect the negative
(-) battery cable.
2.
Disconnect the accelerator position sensor connector
...
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Installation
•
Install the component with the specified
torques.
•
...