Hyundai Accent Manuals

Hyundai Accent: Inspection - Front Wiper Motor. Repair 
procedures - Windshield Wiper/Washer - Body Electrical SystemHyundai Accent: Inspection

Speed Operation Check
1.
Remove the connector (A) from the wiper motor.
1. -
2. IGN+
3. Parking
4. High
5. GND
6. Low

2.
Attach the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 5.
3.
Check that the motor operates at low speed.
4.
Connect the positive (+) lead from the battery to terminal 4 and the negative (-) lead to terminal 5.
5.
Check that the motor operates at high speed.
Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean both the window and the blades with a good cleaner or mild detergent, and rinse thoroughly with clean water.

Installation
1. Install the wiper motor. 2. Install the crank arm. 3. Install the lower and upper linkage to the wiper motor ...

Front Washer Motor. Repair procedures
...

See also:

Windshield defrosting and defogging
WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshie ...

Aux, USB and iPod® port
If your vehicle has an aux and/or USB(universal serial bus) port or iPod® port, you can use an aux port to connect audio devices and a USB port to plug in a USB, or use the HYUNDAI accessory iP ...

Adjustment
Brake Pedal Height and Free Play 1. Disconnect the stop lamp switch connector (A). 2. Adjust the brake pedal height (A) as illustra ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com