Hyundai Accent: Installation
Door Mirror Turn Signal Lamp
| 1. |
Install the door mirror turn signal lamp to the door mirror.
|
| 2. |
Install the door mirror.
|
| 3. |
Connect the negative (-) battery terminal.
|
Removal
Door Mirror Turn Signal Lamp
1.
Remove the mirror (A) from the mirror holder. Be careful not to
damage to the clip.
2.
Remove ...
Room Lamp. Repair procedures
Inspection
Room Lamp
1.
Check that the switch operates properly after disconnecting the
room lamp connector (A).
...
See also:
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes.
...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraul ...
Front Body F ( 5Door )
Engine mounting bracket hole (Ø11)
Battery tray leg bracket tooling hole
(Ø12)
Engine m ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com