Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Lighting System / License Lamp. Repair procedures / Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the trunk trim. (Refer to the BD group - " Trunk Lid")

3.	Disconnect the connector and remove the bulb (A).

4.	Replace the bulb.

License Lamp. Repair procedures

...

Installation

1. Install the bulb. 2. Connect the connector and install the trunk trim. ...

See also:

Description and Operation
Description The starting system includes the battery, starter, solenoid switch, inhibitor switch (A/T), ignition switch, ignition lock switch, connection wires and the battery cable. Whe ...

Replacement
Rear Brake Pads 1. Loosen the guide rod bolt (B) and then remove the rear caliper body (A). Tightening torque: 21.6 ~ 31 ...

Rubber Parts And Tubes
Always prevent gasoline or from touching rubber parts or tubing. ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com