Hyundai Accent: Hazard Lamp Switch. Repair procedures

Installation

1. Install the bulb. 2. Connect the connector and install the trunk trim. ...

Removal

1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia garnish (A). ...

See also:

Oil Pump. Components and Components Location
Components 1. Timing chain cover 2. Inner roter 3. Outer roter 4. Pump cover 5. Gasket 6. Oil screen 7. Oil pan 8. Drain plug gasket 9. Oil drain pl ...

Adjustment
1. After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up or down, or right or left. 2. Adjust the tai ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...