Hyundai Accent: Measuring Body Dimensions
Hyundai Accent RB (2010-2018) Service Manual / General Information / Measuring Body Dimensions
| 1. |
Basically, all measurements in this manual are taken
with a tracking gauge.
|
| 2. |
When a measuring tape is used, check to be sure there
is no elongation, twisting or bending.
|
| 3. |
For measuring dimensions, both projected dimensions
and actual - measurement dimensions are used in this manual.
|
Rubber Parts And Tubes
Always prevent gasoline or from touching rubber parts or
tubing.
...
Dimensions Projected
1.
These are the dimensions measured when the measurement
points are projected from the vehicle's surface, and are the reference
dimensions used for used for body ...
See also:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel (A) after disconnecting the trip
switch connector(B).
...
Installation
Pressure Side Impact Sensor
1.
Install the new pressure side impact sensor with the screws (B)
then connect the pressure side impact sensor connector (A).
...
Outside rearview mirror
Be sure to adjust mirror angles before driving.
Your vehicle is equipped with both lefthand and right-hand outside rearview mirrors.
The mirrors can be adjusted remotely with the remote switch. The ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com