Hyundai Accent Manuals

Hyundai Accent: Installation - Oil Pan. Repair procedures - Lubrication System - Engine Mechanical SystemHyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Engine Mechanical System / Lubrication System / Oil Pan. Repair procedures / Installation

1.
Install the oil pan.
(1)
Using a razor blade and gasket scraper, remove all the old packing material from the gasket surfaces.
Check that the mating surfaces are clean and dry before applying liquid gasket.
(2)
Apply liquid gasket as an even bead, centered between the edges of the mating surface.
Liquid gasket : Hyundai Gray RTV or TB 1217H or LOCTITE 5900H
•
To prevent leakage of oil, apply liquid gasket to the inner threads of the bolt holes.
•
Do not install the parts if five minutes or more have elapsed since applying the liquid gasket.
Instead, reapply liquid gasket after removing the residue.
•
After assembly, wait at least 30 minutes before filling the engine with oil.
(3)
Install the oil pan (A) with the bolts.
Uniformly tighten the bolts in several passes.
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

2.
Refill engine oil.

Removal
1. Remove the under covers (A). Tightening torque: 6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 7.9lb-ft) ...

Oil Pressure Switch. Repair procedures
Inspection 1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. ...

See also:

Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraul ...

Removal
1. Drain the brake fluid through the bleed plug (A). 2. Remove the clutch release cylinder assembly (C) after removing thd tube (B) ...

Parking brake
Applying the parking brake To engage the parking brake, first apply the foot brake and then pull up the parking brake lever as far as possible without pressing the release button. In addition it ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com