Hyundai Accent: Inspection

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV). Repair procedures / Inspection

1.	Turn the ignition switch OFF.

2.	Disconnect the PCSV connector.

3.	Measure resistance between the PCSV terminals 1 and 2.

4.

Check that the resistance is within the specification.

Specification: Refer to “Specification”

Purge Control Solenoid Valve (PCSV). Repair procedures

...

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the purge control solenoid valve connector ...

See also:

Coolant. Repair procedures
Refilling And Bleeding Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid und ...

Interior B ( 4Door )
Seatbelt height adjust upper mounting hole (Ø15) Seatbelt height adjust lower mounting hole (Ø15) ...

Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com