1. |
Remove the transaxle assembly. (Refer to "Manual
transaxle system" in MT group)
|
2. |
Remove the clutch cover bolts. Be careful not to
be bent ortwist bolts. Loosen bolts in diagonal directions.
|
Inspection
1.
Check the signal waveform of the CMPS and CKPS using
the GDS.
Specification:
Refer to “Wave Form”
...
Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
High mounted stop light bulb replacement
4 Door
1. Open the trunk lid.
2. Remove the socket by turning it counterclockwise.
3. Replace the bulb from the socket.
4. Install the socket by turning it clockwise.
5 Door
If the light is ...