Hyundai Accent Manuals

Hyundai Accent: Oil Pump. Components and Components Location - Hydraulic System - Automatic Transaxle SystemHyundai Accent: Oil Pump. Components and Components Location

Components

1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaft
9. Sleeve
10. Bolt

Oil Pump Operation Flow

1. Inhale(Oil filter)
2. Inhale(Valve body)
3. Outlet
4. 26/B operation pressure
5. 35R/C operation pressure
6. Lubrication
7. Line up clutch operation pressure
8. Line up clutch cancellation


Oil Pump. Description and Operation
Description The oil pump is built-in as a single unit with the 26 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the tra ...

Fluid. Components and Components Location
Components Location 1. Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug ...

See also:

BCM connectors
Pin Connector A Connector B 1 Battery Room Lamp Output 2 Local ignition1 input in BCM ...

Change to "winter weight" oil if necessary
In some climates it is recommended that a lower viscosity "winter weight" oil be used during cold weather. See section 8 for recommendations. If you aren't sure what weight oil you s ...

License plate light bulb replacement
4 Door 1. Remove the trunk trim. 2. Remove the socket by turning it counterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Install the socket by turning it c ...

Hyundai Accent Manuals

В© 2011-2026 Copyright www.hamanual.com