Hyundai Accent: Hydraulic System

Installation

1. Installation is the reverse of removal. If the oil seal on the transaxle case side is damaged a ...

Description and Operation

Description The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil ...

See also:

Removal
1. Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position. 2. Rem ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

Removal
1. Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group). 2. Remove the rear sea ...