Hyundai Accent Manuals

Hyundai Accent: Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Accent: Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation

Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation

Description

Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter.


Installation
1. Installation is the reverse of removal. • ...

Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.5, 1.42 ~ 7.82) ...

See also:

Power Out Side Mirror Switch. Components and Components Location
Component ...

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : I ...

Hyundai Accent Manuals


В© 2011-2025 Copyright www.hamanual.com