Hyundai Accent Manuals

Hyundai Accent: SS-A Solenoid Valve(ON/OFF). Specifications - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Accent: SS-A Solenoid Valve(ON/OFF). Specifications

Specifications

ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
 Internal resistance(Ω)
10 ~ 11


SS-A Solenoid Valve(ON/OFF). Description and Operation
Description SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body. ...

SS-A Solenoid Valve(ON/OFF). Schematic Diagrams
Circuit Diagram ...

See also:

To resume cruising speed at more than approximately 25 mph (40 km/h)
If any method other than the cruise ON/OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES+ switch is ...

Removal and Installation
1. Disconnect the battery terminals (A). Disconnect the negative terminal first. Tightening torque (-) terminal : ...

ETC (Electronic Throttle Control) System. Specifications
Specification [Throttle Position Sensor (TPS)] Throttle angle(°) Output Voltage (V) TPS1 TPS2 0 0.5 4.5 ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com