Hyundai Accent: Installation
Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Tires/Wheels / Tire. Repair procedures / Installation
| 1. |
Apply tire soap or lubrication to the top and bottom tire beads.
|
| 2. |
To fit the bottom bead, position the valve at the 5 o’clock position
relative to the head on the tire changing machine.
|
| 3. |
Place the tire on the rim so the bottom bead touches the edge
of the rim after the valve (6 o’clock). Rotate the rim clockwise, and
push down on the tire at the 3 o’clock position to fit bottom bead.
|
| 4. |
After bottom bead is on tire, rotate the rim until the valve is
at the 5 o’clock position relative to the head on the tire changing
machine. Push down on the tire at the 3 o’clock position and rotate
the rim clockwise to fit the top bead.
|
| 5. |
Inflate the tire until both beads seat.
|
Removal
1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire
changing machine .
...
See also:
Rear Wheel Speed Sensor. Components and Components Location
Components
1. Rear wheel speed sensor connector
2. Rear wheel speed sensor
...
Specifications
Specifications
Items
Specifications
Rated voltage
DC 12V
Operating temperature range
-30°C ~ +80°C (-22 ~ +17 ...
Inspection
1.
Check the components for damage or deformation.
2.
Compress and extend the piston and check that there is no abnormal
resistance or unus ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com