Hyundai Accent Manuals

Hyundai Accent: Removal - Tire. Repair procedures - Tires/Wheels - Suspension SystemHyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Tires/Wheels / Tire. Repair procedures / Removal

1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire changing machine .

•
The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.
•
Avoid tire/tool contact with the valve on dismount.
•
Dismount should end near the valve.
3.
Rotate the wheel clockwise.

Tire Wear
1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.063 in) 2. If the rema ...

Installation
1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock pos ...

See also:

Recommended SAE viscosity number
CAUTION Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when ...

Automatic turn off function
The interior lights automatically turn off approximately 20 minutes after the ignition switch is turned off. ...

Tilting the sunroof
To open the sunroof Push the sunroof control lever upward until the sunroof moves to the desired position. To close the sunroof Pull the sunroof lever downward until the sunroof moves to the de ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com