Description
Never attempt to measure the circuit resistance of the airbag
module even if you are using the specified tester. If the circuit resistance
is measured with a tester, accidental airbag deployment will result
in serious personal injury.
|
Checking the tire inflation pressure
1.After driving approximately 4~6miles (7~10km or about 10min), stop at a safety
location.
2.Connect connection hose (9) of the compressor directly to the tire valve.
3.Plug the compressor power c ...
Digital clock
WARNING
Do not adjust the clock while driving. You may lose your steering control and
cause an accident that results in severe personal injury or death.
Whenever the battery terminals or related ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
...