Hyundai Accent: Restraint (Advanced)

Installation

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

General Information

...

See also:

Rear Torsion Beam Axle. Repair procedures
Replacement [Disc Type] 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

High mounted stop light bulb replacement
4 Door 1. Open the trunk lid. 2. Remove the socket by turning it counterclockwise. 3. Replace the bulb from the socket. 4. Install the socket by turning it clockwise. 5 Door If the light is ...