Hyundai Accent: Adjustment
| 1. |
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
|
| 2. |
Adjust the tail gate height by turning the tail gate overslam
bumpers (B).
|
| 3. |
After loosening the tail gate striker (C) mounting bolts, adjust
the tail gate striker by moving it up or down, or right or left.
|
Replacement
Tail Gate Trim Replacement
•
When prying with a flat-tip screwdriver, wrap it with
prote ...
Front Door. Components and Components
Location
Components
1. Front door trim
2. Front door quadrant inner cover
3. Front door seal
4. Front door panel
5. Front door belt inside weatherstrip
6. Front door bel ...
See also:
Installation
1.
Dowel pin of crankshaft should be positioned at 3°
in relation to vertical center line.
2.
Align the TDC marks (A) of the CVVT ...
Installation
1.
Installation is the reverse of removal.
2.
Use a SST (09580-0U000) when installing the brake caliper assembly.
...
Reassembly
1.
Wrap tape around the driveshaft spline(TJ) to prevent damage to
the boots.
2.
Apply grease to the joint boot on the side of the wheel an ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com