Hyundai Accent: Alternator. Repair procedures

Alternator. Components and Components Location

Components 1. Nut 2. Pulley 3. Spacer 4. Front bracket 5. Front bearing 6. Stator 7. Rotor 8. Rear bearing 9. Rear bracket 10. Brush holder assem ...

Removal and Installation

1. Disconnect the battery negative terminal first, then the positive terminal. Tightening torque (-) terminal : 4.0 ~ 6. ...

See also:

Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. Do not race the ...

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Ve ...

Reassembly
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boots. 2. Apply grease to the joint boot on the side of the wheel an ...