Hyundai Accent: Description and Operation

The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

Hydraulic System

...

Components and Components Location

Components Location 1. Automatic transaxle 2. Valve body assembly 3. Oil pump assembly ...

See also:

Rear Glass Defogger Switch. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia garnish (A). ...

Front Wheel Alignment
When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always positio ...

Rear Wheel Speed Sensor. Components and Components Location
Components 1. Rear wheel speed sensor connector 2. Rear wheel speed sensor ...