Hyundai Accent: Heated Oxygen Sensor (HO2S). Repair procedures

Heated Oxygen Sensor (HO2S). Schematic Diagrams

Circuit Diagram (M/T) (A/T) ...

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S termi ...

See also:

Installation
If reinstalling used cover, the cover should be installed with its clutch disc as a set. 1. Re ...

Rear Disc Brake. Components and Components Location
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

Closing the hood
1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the eng ...