Hyundai Accent: High Mounted stop lamp. Repair procedures

Inspection

Multifunction Switch (Lighting) 1. Disconnect the negative (-) battery terminal. 2. Remove the lighting switch of the multi-function switc ...

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the trunk trim. (Refer to the BD group - " Trunk Lid") ...

See also:

Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. ...

Troubleshooting
Troubleshooting Starting System Symptom Suspect area Remedy Engine will not crank Battery charge low Charge or replace batt ...

Rear Glass Defogger Switch. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia garnish (A). ...