Hyundai Accent: Inspection

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Audio / Audio Remote Control. Repair procedures / Inspection

1.

Check the audio remote control switch (A) for resistance between terminals in each switch position.

Switch	Connector terminal	Resistance(± 5%)
Seek up	5-7(RH)	430 Ω
Seek down	5-7(RH)	1.11 kΩ
Mode	5-7(RH)	2.11 kΩ
Mute	5-7(LH)	3.11 kΩ
Volume up	5-7(LH)	4.61 kΩ
Volume down	5-7(LH)	6.81 kΩ
Voice	4-5(LH)	10.71 kΩ
END	4-5(LH)	18.91 kΩ
SEND	4-5(RH)	40.91 kΩ

Audio Remote Control. Repair procedures

...

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to the RT group - "DAB and Clock spring ...

See also:

Rail Pressure Sensor (RPS). Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built ...

Installation
1. Install the bulb. 2. Connect the connector and install the trunk trim. ...

Adjustment
1. Install the selected cable (B) to the selected lever (A) of the manual transaxle in engine room. 2. Assemble the shift lever ass ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com